Nippon-aviotronics Multi-Function LCD Projector MP-50E Manuel d'utilisateur télécharger pdf (Page 20)

E-20

■ Typical Installation

1. Select the installation site

Place the projector on an even and stable surface such as a table.

2. Connect the power cord (supplied), and press the

POWER

button (or

POWER

button.)

3. Turn the direction of the lens so that it is perpendicular to the screen.

Turn the unit to the left or right so that the top and bottom lines of the projected image

are parallel.

4. Adjust the adjustable feet to move the projected image to the desired

height. (Adjust the tilt angle between 0° to 7°.)

The position of the projected image can be moved up or down by adjusting tilt.

90°

Adjustable feet

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 58 59

Multi-Function LCD Projector 1
● Features 2
● About Trademarks 2
● Warning Symbols 3
● Safety Precautions 3
CAUTION 4
MP-50E Projector (1) 7
Remote control(1) 7
Power codes (2) 7
Contents 8
■ Terminal Panel 11
BRIGHTNESS 12
Part Names and Functions 13
!2 !3 !4 14
Remote Controller 15
ROTAT IO N 16
■ Remote Control Operations 17
■ Battery Replacement 17
How to Install the Projector 18
Adjustable feet 20
■ Compensating Keystone 21
● List of cables and adapters 22
■ About RGB Video Output 23
Manufacturer Series 24
● Basic connections 26
Connect the power cord 29
2 Adjust the focus 30
3 Compensate the keystone 30
Freeze the projected image 32
Close the window 32
Adjust the zoom ratio 32
Move the zooming position 32
LIVE IMAGE 33
POINTER/ 34
POINTER TYPE 34
297 mm/11.6 in (paper size) 35
288 mm/11.3 in (scan size) 35
210 mm/8.3 in (paper size) 35
216 mm/8.5 in (scan size) 35
A4 horizontal orientation 35
Displaying OHP stored image 36
Adjust the focus 37
Compensate keystone 37
Adjust the brightness 37
5 Adjust the zoom ratio 38
6 Move the zooming position 38
7 Synchronized Adjustments 38
8 Display the pointer 38
9 Select the type of pointer 39
Mute the image 40
1 Turn the lamp off 41
2 Disconnect the power cord 41
<When VIDEO Input is 42
Selected> 42
<When OHP is Selected> 42
Description of Menu Items 43
<Image Adjustment Menu> 44
<Sync Adjustment Menu> 44
◆ Setting 1 45
◆ Setting 2 45
◆ Language Selection 46
◆ Projection Mode 46
1 Press the 47
When selecting “ON” or “OFF” 48
Basic Operation 49
◆ When OHP Is Selected 51
◆ When PC Input Is Selected 51
Maintenance 52
1 Remove the lamp unit cover 54
3 Draw out the lamp unit 55
4 Install a new lamp unit 55
5 Reset the lamp usage time 55
1 Remove the air filter 56
3 Mount the air filter 56
Troubleshooting 57
Repair Service 58
Specifications 59

Commentaires sur ces manuels

Pas de commentaire

Nippon-aviotronics Multi-Function LCD Projector MP-50E Manuel d'utilisateur Page 20

Commentaires sur ces manuels